Not what you're looking for?
Totally Enclosed Air Over Totally Enclosed Air Over from Century Motors All Century Motors ProductsDiameter: 5-5/8"; HP: 1/3; Volts: 460; F/L Amps: 1.30; Phase: Single; Hz: 60; Service Factor: 1.00; RPM: 1075; Speeds: 1; Rot.: Rev.; Efficiency: 65%; Shaft Diam.: 1/2"; Shaft Length: 6-1/2"; Bearing Type: Dbl-Sld Ball; Wt. Lbs.: 15.4; NEMA Frame: 48; Type: PSC; Mounting: Thru-bolt; Std. Mount. Pos.: All Angle; Enclosure: TEAO; Insulation Class: F; Thermal Protection: Auto; Ambient Operating Temp. (Celsius): 70; Agency Certification: UR/CSA; A: 5-1/4"; Capacitor to Match: G21-933;
Mfg. #: FEH1036SF
Brand: Century Motors
Box Qty:
| A | 5-1/4" |
|---|---|
| Agency Certification | UR/CSA |
| Ambient Operating Temp. (Celsius) | 70 |
| Bearing Type | Dbl-Sld Ball |
| Capacitor to Match | G21-933 |
| Diameter | 5-5/8" |
| Efficiency | 65% |
| Enclosure | TEAO |
| F/L Amps | 1.30 |
| HP | 1/3 |
| Hz | 60 |
| Insulation Class | F |
| Mounting | Thru-bolt |
| NEMA Frame | 48 |
| Phase | Single |
| RPM | 1075 |
| Rot. | Rev. |
| Service Factor | 1.00 |
| Shaft Diam. | 1/2" |
| Shaft Length | 6-1/2" |
| Speeds | 1 |
| Std. Mount. Pos. | All Angle |
| Thermal Protection | Auto |
| Type | PSC |
| Volts | 460 |
| Wt. Lbs. | 15.4 |
| Shipping Weight | 15.65 |
| Shipping Width | 6.80 |
| Shipping Length | 14.10 |
| Shipping Height | 6.90 |
| Harmonize Code | 8501.40.4040 |
|---|---|
| Country of Origin | INDIA |
See catalog page 30 for additional notes and/or restrictions.
Replaces motors in units by Carrier/Bryant and others
70°C ambient |Three year warranty |UL and CSA approved Class F insulation achieves superior dielectric strength for long thermal life |Single-speed |Sleeve or ball bearing |Large high-temperature nylon glass-filled shaft slinger for bearing protection; keeps water and dirt out of motor bearings|36” color coded high temperature leads for easy identification and installation|Easy to remove drain plugs in both end frames allow accumulated condensation to be expelled quickly
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.