Not what you're looking for?
Open Air Over Open Air Over from Century Motors All Century Motors ProductsNEMA Frame: 56; Diameter: 6-1/2"; HP: 1; Phase: Three; Volts: 460/208-230; F/L Amps: 2.6/5.2-5.0; Hz: 60; Service Factor: 1.00; RPM: 850; Speeds: 1; Rot.: Rev.; Efficiency: 77.90%; Shaft Diam.: 5/8"; Shaft Length: 6"; Bearing Type: Ball; Wt. Lbs.: 44.0; Type: Polyphase, Induction Type, Single Or Dual Voltage; Mounting: Rigid Base; Std. Mount. Pos.: All Angle; Enclosure: OAO; Insulation Class: F; Thermal Protection: Auto; Ambient Operating Temp. (Celsius): 70; Agency Certification: Agency_Certification; A: 12-1/3"; Shaft OLE x Diam. x LE: 5/8 x 6;
Mfg. #: H1053RBV1
Brand: Century Motors
Box Qty:
| A | 12-1/3" |
|---|---|
| Agency Certification | Agency_Certification |
| Ambient Operating Temp. (Celsius) | 70 |
| Bearing Type | Ball |
| Diameter | 6-1/2" |
| Efficiency | 77.90% |
| Enclosure | OAO |
| F/L Amps | 2.6/5.2-5.0 |
| HP | 1 |
| Hz | 60 |
| Insulation Class | F |
| Mounting | Rigid Base |
| NEMA Frame | 56 |
| Phase | Three |
| RPM | 850 |
| Rot. | Rev. |
| Service Factor | 1.00 |
| Shaft Diam. | 5/8" |
| Shaft Length | 6" |
| Shaft OLE x Diam. x LE | 5/8 x 6 |
| Speeds | 1 |
| Std. Mount. Pos. | All Angle |
| Thermal Protection | Auto |
| Type | Polyphase, Induction Type, Single Or Dual Voltage |
| Volts | 460/208-230 |
| Wt. Lbs. | 44.0 |
| Shipping Weight | 44.20 |
| Shipping Width | 10.50 |
| Shipping Length | 23.00 |
| Shipping Height | 10.00 |
| Harmonize Code | 8501.51.6040 |
|---|---|
| Note | F/L Amps shown in chart is based on a rating of 60 Hz and 208V. |
| Country of Origin | MEXICO |
See catalog page 42 for additional notes and/or restrictions.
70°C (158°F) ambient temperature |Enclosed shaft end bracket with vented frame |Automatic reset thermal protector |External shaft slinger |A threaded lead exit |Voltage Change Device™ (VCD) to quickly change voltage on the spot |Double-sealed ball bearings |For commercial and residential fan/heat pump applications and may be installed outdoors
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.