Three-Phase Condenser Direct Drive Fan Motor

Three-Phase Condenser Direct Drive Fan Motor

NEMA Frame: 56Y; HP: 1-1/2; Phase: Three; Volts: 200-230/460; F/L Amps: 5.5; Hz: 60/50; Service Factor: 1.00; RPM: 1140; Speeds: 1; Rot.: Rev.; Efficiency: 78.50%; Shaft Diam.: 5/8"; Shaft Length: 6"; Bearing Type: Ball; Wt. Lbs.: 35.0; Type: Squirrel Cage Induction Run; Mounting: Belly band/Hub; Std. Mount. Pos.: Horizontal; Enclosure: OAO; Insulation Class: H; Thermal Protection: Auto; Ambient Operating Temp. (Celsius): 70; Agency Certification: UR/CSA; A: 10-1/8"; R: 10-5/8";

Order #: S88-156

Internal Product ID:

Catalog Pg.: 43

Mfg. #: 056T11O5303

Brand: Leeson

Box Qty:

Product Specifications
A 10-1/8"
Agency Certification UR/CSA
Ambient Operating Temp. (Celsius) 70
Bearing Type Ball
Efficiency 78.50%
Enclosure OAO
F/L Amps 5.5
HP 1-1/2
Hz 60/50
Insulation Class H
Mounting Belly band/Hub
NEMA Frame 56Y
Phase Three
R 10-5/8"
RPM 1140
Rot. Rev.
Service Factor 1.00
Shaft Diam. 5/8"
Shaft Length 6"
Speeds 1
Std. Mount. Pos. Horizontal
Thermal Protection Auto
Type Squirrel Cage Induction Run
Volts 200-230/460
Wt. Lbs. 35.0
Shipping Weight 35.35
Shipping Width 8.00
Shipping Length 17.00
Shipping Height 8.10
Compliance/Notes
Harmonize Code 8501.52.4000
Country of Origin MEXICO

See catalog page 43 for additional notes and/or restrictions.

Description
  • 56Y frame
  • 1140 RPM, ball bearing
  • Horizontal mounting
  • Automatic reset thermal protection
  • Rotation: Reversible
  • Features unique voltage change device for simplified voltage change
Applications

Commercial condenser fans may be installed outdoors. Used on Trane, Carrier, Climatrol, and York units 5 tons and larger

Features

Automatic reset thermal protection |Horizontal mount only|70°C ambient |Shaft end bell closed, open opposite end |Rotation: reversible |Belly band mount and will accept resilient base kits |26" leads |Features unique voltage change device for simplified voltage change|Four locating screws 90° apart, 3-3/8” from outer edge of shaft slinger |1.0 Service Factor |Ball Bearing |Continuous Duty

Warranty

WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.

WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.

RETURNS - All returns are subject to a restocking charge.