Diameter: 5"; HP: 1/4-1/6; Volts: 230; F/L Amps: 1.70; Phase: Single; Hz: 60; Service Factor: 1.00; RPM: 1050; Speeds: 3; Rot.: Rev.; Efficiency: 65%; Shaft Diam.: 1/2"; Shaft Length: 6"; Bearing Type: Slv; Wt. Lbs.: 11.0; NEMA Frame: 42; Type: PSC; Mounting: Resilient/Thru Bolts; Enclosure: OAO; Insulation Class: B; Thermal Protection: Yes; Ambient Operating Temp. (Celsius): 40; Agency Certification: UR/CSA; A: 4-1/8"; R: 5-1/8"; Capacitor to Match: G21-930;
Mfg. #: D151A
Brand: Fasco
Box Qty:
A | 4-1/8" |
---|---|
Agency Certification | UR/CSA |
Ambient Operating Temp. (Celsius) | 40 |
Bearing Type | Slv |
Capacitor to Match | G21-930 |
Diameter | 5" |
Efficiency | 65% |
Enclosure | OAO |
F/L Amps | 1.70 |
HP | 1/4-1/6 |
Hz | 60 |
Insulation Class | B |
Mounting | Resilient/Thru Bolts |
NEMA Frame | 42 |
Phase | Single |
R | 5-1/8" |
RPM | 1050 |
Rot. | Rev. |
Service Factor | 1.00 |
Shaft Diam. | 1/2" |
Shaft Length | 6" |
Speeds | 3 |
Thermal Protection | Yes |
Type | PSC |
Volts | 230 |
Wt. Lbs. | 11.0 |
Shipping Weight | 11.75 |
Shipping Width | 5.51 |
Shipping Length | 15.75 |
Shipping Height | 5.51 |
Harmonize Code | 8501.40.4040 |
---|---|
Country of Origin | MEXICO |
See catalog page 11 for additional notes and/or restrictions.
Unit heaters, furnace blower, fans and blowers |Open ventilated PSC motors designed as OEM replacement furnace blower/unit heater motors for Payne, Day & Night, Bryant, Reznor, Intertherm, Coleman, Janitrol, etc.
Thermally protected, capacitor leads with 1/4" flag terminals, reversing plug |Shaft: 2-1/2" flatted |Studs: three or four on 4.62" centers, 13/16" long, #10-32 thread, on shaft end of motor |Resilient rings: not included
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.