NEMA Frame: 215T; Diameter: 9.42''; HP: 10; Phase: Three; Volts: 208-230/460; F/L Amps: 23.8; Hz: 60/50; Service Factor: 1.15; RPM: 1800; Speeds: 1; Rot.: Rev.; Efficiency: 91.70%; Shaft Diam.: 1-3/8"; Shaft Length: 3-3/8"; Bearing Type: Ball; Wt. Lbs.: 100.0; Type: Polyphase; Mounting: Rigid Base; Std. Mount. Pos.: Horizontal; Enclosure: ODP; Insulation Class: F; Thermal Protection: None; Ambient Operating Temp. (Celsius): 40; Agency Certification: UR/CSA/CE; Frame Construction: Rolled Steel; Shaft OLE x Diam. x LE: 1.375" X 3.38";
Mfg. #: D10P2D
Brand: US Motors
Box Qty:
| Agency Certification | UR/CSA/CE |
|---|---|
| Ambient Operating Temp. (Celsius) | 40 |
| Bearing Type | Ball |
| Diameter | 9.42'' |
| Efficiency | 91.70% |
| Enclosure | ODP |
| F/L Amps | 23.8 |
| Frame Construction | Rolled Steel |
| HP | 10 |
| Hz | 60/50 |
| Insulation Class | F |
| Mounting | Rigid Base |
| NEMA Frame | 215T |
| Phase | Three |
| RPM | 1800 |
| Rot. | Rev. |
| Service Factor | 1.15 |
| Shaft Diam. | 1-3/8" |
| Shaft Length | 3-3/8" |
| Shaft OLE x Diam. x LE | 1.375" X 3.38" |
| Speeds | 1 |
| Std. Mount. Pos. | Horizontal |
| Thermal Protection | None |
| Type | Polyphase |
| Volts | 208-230/460 |
| Wt. Lbs. | 100.0 |
| Shipping Weight | 183.00 |
| Shipping Width | 15.00 |
| Shipping Length | 23.00 |
| Shipping Height | 15.00 |
| Harmonize Code | 8501.52.4000 |
|---|---|
| Country of Origin | MEXICO |
See catalog page 127 for additional notes and/or restrictions.
Designed for pumps, fans, compressors and other general purpose applications where contaminants are minimal
1.15 service factor, open dripproof construction, rigid base, 50-60 Hz|Class F insulation, class B rise at service factor (140 frame and larger) |Rolled steel frame 56-320, cast iron frame 280-440 |40°C ambient, NEMA design B performance |Regreasable bearings on 440T and larger |Suitable for Wye-Delta start 250T and larger |All motors are tested and designed to be 100% variable frequency drives (VFDs) compatible |No thermal protection
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.